Sale Off
Rival T-Series Jammer Arms and Spotter Arms Bundle (Pairs) (50mm)

£239.99£329.99

Product Details

The Rival Strength Jammer Arms and Spotter Arms bundle enables you to quickly and easily setup your Jammer Arms for a wide range of exercises. By using the Spotter Arms to position the Jammers, you no longer need to struggle and reach down or behind you when starting lifts!


Included in this bundle is;


You can pickup the T-Series Jammer Arms, Spotter Arms and 48mm Spring Collars in this bundle and save over £80 off RRP!


*PLEASE NOTE* - The T-Series Jammer Arms are compatible with our racks in our T-Series range, or with racks that have 50x50mm box section uprights, 1-inch/26mm front facing holes, and 50mm or 100mm hole spacing (centre to centre of the hole).

Please ensure your rack is compatible with our Jammer Arms before making a purchase.


The T-Series Spotter Arms are compatible with all racks in our T-Series, or that have 50mm x 50mm box section uprights, and 1-inch front-facing holes.


Alternatively, have now introduced the T-Series Adjustable Jammer Arms 2.0, which feature a universal bracket that is suitable for all racks with 50x50mm box section uprights and 1-inch holes - plus some other great improvements!


Click HERE to check them out!


Contact us if you have any questions, or are unsure on your rack's compatibility, and we'd be happy to help you out!

SPECIFICATION

Jammer Arm Specification

Load capacity - 100KG

Total length - 940mm

Arm length - 905mm

Total width -  700mm

Handle width - 280mm

Handle length - 277mm

Handle thickness - 33mm

Weight peg usable length - 275mm

Frame - 50x50mm

Weight peg diameter - 48mm

(Specialist 48mm collars are required and are not provided - click HERE to check them out!)

1" Diameter front and side facing holes

50mm front and side facing holes spacing

Steel thickness ranges from 2mm to 8mm

Black powder coat finish

Protective plastic on all rack touch points to prevent scratches and damages

Compatible rack Specification

Box section uprights - 50x50mm

Front facing hole diameter - 1-inch/26mm 

Front facing hole spacing - 50mm or 100mm


Your rack specification must exactly match the specification listed here or it will NOT be compatible with our Jammer Arms.


Please contact us using the methods at the bottom of the page, and we'd be happy to advise if your rack and our Jammers are compatible!


Alternatively, have now introduced the T-Series Jammer Arms 2.0, which feature a universal bracket that is suitable for all racks with 50x50mm box section uprights and 1-inch holes - plus some other great improvements!


Click HERE to check them out!

spotter Arm Specification

Load capacity - 250KG

Total length - 670mm

Working length from rack - 600mm

Frame - 50x50mm

25mm peg, suitable for racks with 1-inch / 26mm front-facing holes.

Each arm weighs 3.7KG.

WHY CHOOSE RIVAL?

Related Products

Speciality 48mm Collars

T-Series Adjustable Jammer Arms 2.0

T-Series Rack Attachments

Compatible Racks and Stands

Sale Off
Rival T-2 Series Power Rack

  • PRODUCT DETAILS
  • SPECIFICATION
  • WHY CHOOSE RIVAL?
  • RELATED PRODUCTS

The Rival Strength Jammer Arms and Spotter Arms bundle enables you to quickly and easily setup your Jammer Arms for a wide range of exercises. By using the Spotter Arms to position the Jammers, you no longer need to struggle and reach down or behind you when starting lifts!


Included in this bundle is;


You can pickup the T-Series Jammer Arms, Spotter Arms and 48mm Spring Collars in this bundle and save over £80 off RRP!


*PLEASE NOTE* - The T-Series Jammer Arms are compatible with our racks in our T-Series range, or with racks that have 50x50mm box section uprights, 1-inch/26mm front facing holes, and 50mm or 100mm hole spacing (centre to centre of the hole).

Please ensure your rack is compatible with our Jammer Arms before making a purchase.


The T-Series Spotter Arms are compatible with all racks in our T-Series, or that have 50mm x 50mm box section uprights, and 1-inch front-facing holes.


Alternatively, have now introduced the T-Series Adjustable Jammer Arms 2.0, which feature a universal bracket that is suitable for all racks with 50x50mm box section uprights and 1-inch holes - plus some other great improvements!


Click HERE to check them out!


Contact us if you have any questions, or are unsure on your rack's compatibility, and we'd be happy to help you out!

Jammer Arm Specification

Load capacity - 100KG

Total length - 940mm

Arm length - 905mm

Total width -  700mm

Handle width - 280mm

Handle length - 277mm

Handle thickness - 33mm

Weight peg usable length - 275mm

Frame - 50x50mm

Weight peg diameter - 48mm

(Specialist 48mm collars are required and are not provided - click HERE to check them out!)

1" Diameter front and side facing holes

50mm front and side facing holes spacing

Steel thickness ranges from 2mm to 8mm

Black powder coat finish

Protective plastic on all rack touch points to prevent scratches and damages

Compatible rack Specification

Box section uprights - 50x50mm

Front facing hole diameter - 1-inch/26mm 

Front facing hole spacing - 50mm or 100mm


Your rack specification must exactly match the specification listed here or it will NOT be compatible with our Jammer Arms.


Please contact us using the methods at the bottom of the page, and we'd be happy to advise if your rack and our Jammers are compatible!


Alternatively, have now introduced the T-Series Jammer Arms 2.0, which feature a universal bracket that is suitable for all racks with 50x50mm box section uprights and 1-inch holes - plus some other great improvements!


Click HERE to check them out!

spotter Arm Specification

Load capacity - 250KG

Total length - 670mm

Working length from rack - 600mm

Frame - 50x50mm

25mm peg, suitable for racks with 1-inch / 26mm front-facing holes.

Each arm weighs 3.7KG.

  • We've graded these items as suitable for commercial use, due to their exceptional quality and durability

  • Choose Klarna at checkout to lift now, and pay later - all with NO FEES when you pay on time

Speciality 48mm Collars

T-Series Adjustable Jammer Arms 2.0

T-Series Rack Attachments

Compatible Racks and Stands

Sale Off
Rival T-2 Series Power Rack


Bench Press

Use the Spotters to set your Jammers at the perfect height ready for a bench press


As well as making it so much easier to start benching (no more having to reach down to get the arms, or needing someone there to help you), the spotters also make the press far safer in case of failure

Seated Shoulder Press

Set your Jammers and Spotters higher up your rack uprights, and you're ready to go with a seated shoulder press


The distance that the Jammers are above the Spotters will determine the way the arms move, so take a bit of time to find that perfect lifting angle!

Incline Bench Press

To setup the Incline Bench Press, position your Jammers quite high above the Spotters


The most important part of setting up this exercise is that you get the angle of movement right - make sure for the majority of the exercise you're pressing in a straight line away from your body



Front Squat

You can also perform squats with the Jammer and Spotters!


Just position the Arms low on your rack - they should be as low as the depth of your squat - and you're ready to go


As with the Standing Shoulder Press, we find facing the rack and having the Jammer and Spotter Arms close together is the most comfortable way to perform this lift

Standing Shoulder Press

As with the seated shoulder press, simply position your Jammer and Spotter Arms higher up the rack, and start pressing


We prefer to face the rack for this exercise, so we're pressing the arms up and away from us - but this is just personal preference! With all of these exercises, have a play around and find what is most comfortable

Introducing the T-series Adjustable Jammer Arms 2.0!

We have now introduced the T-Series Adjustable Jammer Arms 2.0, which feature a universal bracket that is suitable for all racks with 50x50mm box section uprights and 1-inch holes


The brackets also include 13 holes and a safety pin for angling and locking the arms at different positions, so no more need to reach behind you when starting your lifts


Click below to check them out!


FREQUENTLY ASKED QUESTIONS

Is my rack compatible with these Jammer Arms?

Our Jammer Arms are compatible with our racks in our T-Series range, or with racks that have 50x50mm uprights, 26mm front facing holes, and 50mm or 100mm hole spacing  (centre to centre of the hole).


Please ensure your rack is compatible with our Jammer Arms before making a purchase, and matches the spec above exactly.


Contact us if you have any questions or unsure on your rack's compatibility, and we'd be happy to help you out!


Alternatively, have now introduced the T-Series Adjustable Jammer Arms 2.0, which feature a universal bracket that is suitable for all racks with 50x50mm box section uprights and 1-inch holes - plus some other great improvements!


Click below to check them out!

We also stock Jammer Arms for racks with 60x60mm uprights, and 75x75mm uprights. 

How will my Jammer Arms and Spotter Arms Bundle be delivered?

We will send the T-Series Jammer Arms with one of our courier partners on a next working day service. 

The jammers will be sent in one box.

If the jammers do not arrive on the next working day, please check your tracking and your delivery options before contacting us.


If the jammer arms are ordered alongside other items, we may send them on a 2-working day pallet service.

We will contact you if you have placed a large order.


Please see our Shipping Policy for more information.

What's in the box?

The bundle will arrive in 2 boxes.


The jammers arrive pre-built.


No tools are included. We recommended all bolts are checked and tightened if necessary before use.

What does the Warranty cover?

Your 1-year Warranty covers the Jammers and Spotters breaking or not performing as expected.

The warranty does not cover cosmetic damages, general wear-and-tear, and the Arms breaking due to misuse.


Please see our Warranty Page.

I think I'm missing a part?

If you believe a part is missing, please contact us via one of the suggested methods, and let us know which part is missing. We will then sort out a suitable replacement.

How can I return this item?

If for any reason you'd like to return the T-Series Jammer Arms and Spotter Arms Bundle, then please contact us using one of the suggested methods.

We will evaluate the best course of action on a case-by-case basis.


Please see our Refund Policy for more information.

The Bundle has arrived damaged.

In the very unlikely event that the Jammers/Spotters have arrived damaged, please take photos of the damaged packaging (prior to opening the product if possible), and also the damages to the Arms, and contact us immediately.


We will evaluate the best course of action on a case-by-case basis.

Can't find an answer to your question?

  • Call us on 07484 634 921 or on 01403 331 625 (Mon-Fri, 9am - 5pm)
  • Use the Facebook Messenger button in the bottom corner of your screen - no account required, and we're available outside of office hours and at weekends!
  • Email us on sales@rivalstrength.co.uk

When you contact us, you'll be speaking to the owners of Rival Strength; either Jake or Sam! We're eager to help where we can, and get you an answer as soon as possible - even outside of office hours

FEATURED PRODUCTS
x
x
x